This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Tailor made design service contact us

Vent Axia 496036 Vent-Axia Lo-Carbon Heat Save

£382.60
Item is in stock Hurry! Low inventory Item is out of stock Item is unavailable

Heat Save Through-The-Wall Heat Recovery Unit

  • Suitable for improving indoor air quality in habitable rooms
  • Fully customisable ventilation via a control panel
  • Easy to install, no need for ducting, wall sleeve included
  • Easily maintained with cleanable filter and ceramic heat exchanger
  • 5 year warranty for peace of mind
  • Up to 84% heat recovery to reduce energy bills
  • Anti-frost protection built in
  • Replace extracted air with filtered air
  • Reduce the homes carbon footprint and save money on energy bills

Overview

The Vent-Axia Lo-Carbon Heat Save is a ventilation unit designed for living rooms and bedrooms in single and multi-family buildings. The unit is usually located in an exterior wall to provide new air to the room.

The Vent-Axia Lo-Carbon Heat Save uses a reversible fan to extract dirty air from the room and replace it with outside air 70 seconds later. This air passes through a filter to ensure that clean air enters the room. These systems work best in pairs as when one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They are controlled by a SENWZP Sentinel wired zone controller which can operate up to 8 units in synchronization. This provides a single room or whole house balanced ventilation system with heat recovery.

As well as filtering the air, the Vent-Axia Lo-Carbon Heat Save uses a thermal accumulator to extract warmth from the outgoing air and uses it to temper the incoming air to avoid the feeling of cold drafts and recover heat that would otherwise be lost to the outside.

Typical Installation

The Vent-Axia Lo-Carbon Heat Save can be fitted in a 180mm diameter hole. Maximum wall thickness is 460mm or 745mm with optional wall tube (see accessories). The wall sleeve length (included up to 460mm) can be cut down to size to fit any wall thickness. Vent-Axia Lo-Carbon Heat Save units work best in pairs.

When one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They alternate direction every 70 seconds when the thermal accumulator on the extract unit has warmed up allowing the supply air to benefit from these thermal gains.

They are controlled by a SENWZP Sentinel wired zone controller. This is fully modular and controllable with customized ventilation profiles available so that every room in the home can have the perfect ventilation.

Performance

  • Wall opening: 180mm
  • Wall thickness with plaster/render: >290mm
  • Supply Air flow: 2.8 - 12.0l/s
  • Extract Air flow: 2.8 - 12.0l/s
  • Average Air flow: 1.4 - 6.0l/s
  • Power consumption:3W
  • Sound emission: 18 - 36dB(A
  • Heat Recovery: 84%
  • Temperature range: -20 - 50�C

Minimum 3 Year Warranty on All Fans

[{"variant_id":"58320635494784" , "metafield_value":""}]

Vent Axia 496036 Vent-Axia Lo-Carbon Heat Save

£382.60
Frequently Asked Questions

Need more advice?

The deeper you delve into mechanical ventilation, the more questions and terminology it throws at you. Where do you start? If you are getting confused or not finding the answer you are looking for, head over our FAQs page here to view our most frequently asked questions.

If you are still struggling to find the answer to your specific question, why not contact us here. We can guide you on your problem and help find the best solution for your situation.

Shipping Information

Fast shipping

Our aim is that all stock items ordered before 4pm Monday to Friday are dispatched on the same day on a 2-3 working day delivery service. This does exclude some of the more remote Welsh, Northern Ireland, and Scottish Highland postcodes, which are usually delivered within 3-5 working days. If you require a product urgently we suggest that you contact us first to ensure we have the appropriate stock levels. Non-stock items generally have a 3-5 working day lead time from manufacturers and we will contact you with updates if there are any delays. Wherever possible for larger items we will endeavour to have them shipped directly to you from the manufacturer to minimise shipping times.

Dedicated design team

Custom Design Service

We understand that every space is unique, and so are its air quality needs. Our custom design service is tailored to cater to the specific requirements of your home, architectural project, or community initiative. With our expert team at your side, we craft bespoke ventilation solutions, ensuring optimal air quality for your distinct environment.

Not sure if this is the right solution?

Get in touch with one of our expert team

Knowledge Base